Trend Lock Jig
Ref: LOCK/JIG
Stock: 7-10 days delivery
Click & Collect Available
Product Details
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates & body.
An auger bit and drill is required to complete deep mortises.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Technical Info
Door thickness min.=34 mmDoor thickness max.=58 mm
Template outer size=234.3 x 59.8 x1.5mm
Includes templates for locks having the following face-plate dimensions:
Metric (Imperial approx.) (D x OL)=Template
22.2x156 mm (7/8"x 6 1/8")=1
22.5x152.5 mm (